1 Reference Manual CSI 2130 Machinery Health Analyzer Single- and Dual-Channel MHM Copyright 2 2011 by Emerson Process Management. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Emerson. Disclaimer This manual is provided for informational purposes. COMPUTATIONAL SYSTEMS, INCORPORATED MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT- NESS FOR A PARTICULAR PURPOSE. Computational Systems, Incorporated shall not be liable for errors, omissions, or inconsistencies that may be contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Transfer files with CSI 2140 3.3.6 USB connection The analyzer can communicate with AMS Machinery Manager using a USB cable. The USB interface is the most common way to transfer files between the analyzer and the AMS Machinery Manager. USB is the default connection type. Electronic Components, Distributor Inventories, Datasheets. Update your browser. Your browser (Internet Explorer) is out of date. Update your browser for more security, comfort and the best experience for this site.
Information in this document is subject to change without notice and does not represent a commitment on the part of Computational Systems, Incorporated. The information in this manual is not all-inclusive and cannot cover all unique situations.
Product Support Should you have any comments on this documentation or questions concerning the Agreement on the following pages, please contact Emerson s Product Support Department. Address: Emerson Process Management 835 Innovation Drive Knoxville, TN USA Phone: United States and Canada: FAX: Internet United States and Canada: Worldwide Web: Emerson Process Management s Reference Manuals This document was written, illustrated, and produced by Emerson s Engineering Publications Group using Adobe FrameMaker, Adobe Photo- Shop, and Macromedia FreeHand. Printed copies are produced using the Xerox DocuTech publishing system.
Trademarks and Servicemarks AccuTrend; Changing the way the world performs maintenance, and Emerson Process Management logo; CSI RBM (Mexico); Doctor Know; Infranalysis; InfraRoute; Levels of Awareness Training; M&D; MachineGuard; MachineView; MasterNet; Motor- View; Nspectr; O&M Workstation; OilView (Japan); RBMware; Reliability-Based Maintenance, and logo; RollView; StarterTrend; STATUS Technologies; TrendSetter; Tribology Minilab; UltrasSpec; WAVEPAK; and RBMconsultant are registered trademarks of Emerson Process Management. CSI (China, Japan, Venezuela, Australia); CSI RBM (Venezuela); Status Condition Monitor; PeakVue; RBMview; RBMware (Australia, China, Japan); RBMwizard; Reliability-Based Maintenance (Venezuela); SonicScan; SonicView; SST; STATUS RF SmartSensor; STATUS RF Transceiver; VersaBal; VibPro; VibView; and Weldwatch are pending trademarks of Computational Systems, Incorporated. Lubricant Profile and Trivector are registered servicemarks of Computational Systems, Incorporated.
RBM; RBMware (China); Reliability-Based Maintenance (Venezuela); and STATUS Technologies and design are pending servicemarks of Computational Systems, Incorporated. Adobe is a trademark and FrameMaker and Photo- Shop are registered trademarks of Adobe Systems, Inc. Power Macintosh is a trademark of Apple Computer, Inc. Macromedia is a registered trademark and FreeHand is a trademark of Macromedia, Inc. Xerox and DocuTech are trademarks of Xerox Corporation. All other brand or product names are trademarks or registered trademarks of their respective companies.
2 3 Patents The product(s) described in this manual are covered under existing and pending patents. License Agreement IMPORTANT: CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT BEFORE OPENING THE PACKAGE OR PROCEEDING WITH INSTALLATION.
OPENING THE PACKAGE OR COMPLETING THE INSTAL- LATION INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS AND CONDI- TIONS CONTAINED IN THIS AGREEMENT, CANCEL ANY INSTALLATION AND PROMPTLY RETURN THIS PRODUCT AND THE ASSOCIATED DOCUMENTATION TO EMERSON PROCESS MANAGEMENT, AND YOUR MONEY WILL BE REFUNDED. NO REFUNDS WILL BE GIVEN FOR PROD- UCTS WITH DAMAGED OR MISSING COMPONENTS. Definition of Software As used herein, software refers to any computer program contained on any medium. Software includes downloadable firmware for use in devices such as analyzers or MotorStatus units and it includes computer programs executable on computers or computer networks. Software License You have the non-exclusive right to use this software on only one device at a time. You may back-up the software for archival purposes.
For network systems, you have the non-exclusive right to install this software on only one server. Read/write access is limited to the number of licenses purchased. The number of read-only accesses is not limited. Software Updates Emerson Process Management agrees to provide Purchaser, at no charge except for media, preparation and shipping charges, for one (1) year from the date of purchase, updates to the software made at the sole discretion of Emerson. Should Purchaser desire to purchase software maintenance for the next succeeding year following the first year from the date of purchase, and thereafter on an annual basis, and if Emerson Process Management is still providing maintenance, Purchaser may purchase the same, annually, at the existing rate. Updates/Upgrades Upon receipt of new Emerson Process Management software replacing older Emerson software, you have 30 days to install and test the new Emerson software on the same or a different device. At the end of the 30-day test period, you must both remove and return the new Emerson software or remove the older Emerson Process Management software.
Ownership The licensed software and all derivatives are the sole property of Emerson Process Management Technology, Inc. You may not disassemble, decompile, reverse engineer or otherwise translate the licensed program. You may not distribute copies of the program or documentation, in whole or in part, to another party. You may not in any way distort, or otherwise modify the program or any part of the documentation without prior written consent from Emerson Process Management. Transfer You may transfer the software and license to another party only with the written consent of Emerson Process Management and only if the other party agrees to accept the terms and conditions of this Agreement. If you transfer the program, you must transfer the documentation and any backup copies or transfer only the documentation and destroy any backup copies. Copyright The software and documentation are copyrighted.
All rights are reserved. Termination If you commit a material breach of this Agreement, Emerson Process Management may terminate the Agreement by written notice.
Virus Disclaimer Emerson Process Management uses the latest virus checking technologies to test all its software. However, since no anti-virus system is 100% reliable, we strongly advise that you use and anti-virus system in which have confidence to verify the software is virus-free.
Emerson makes no representations or warranties to the effect that the licensed software is virus-free. 3 4 NO WARRANTY THE PROGRAM IS PROVIDED AS-IS WITHOUT ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR MERCHANT- ABILITY OR FITNESS FOR A PARTICULAR PURPOSE. LIMITATION OF LIABILITY AND REMEDIES IN NO EVENT WILL EMERSON PROCESS MANAGEMENT BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAM- AGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR THE INABILITY TO USE THIS PROGRAM.
THE LICENSEE'S SOLE AND EXCLUSIVE REMEDY IN THE EVENT OF A DEFECT IN WORKMANSHIP OR MATERIAL IS EXPRESSLY LIMITED TO THE REPLACE- MENT OF THE DISKETTES. IN NO EVENT WILL EMERSON PROCESS MANAGEMENT'S LIABILITY EXCEED THE PUR- CHASE PRICE OF THE PRODUCT. Export Restrictions You agree to comply fully with all laws, regulations, decrees and orders of the Unites States of America that restrict or prohibit the exportation (or reexportation) of technical data and/or the direct product of it to other countries, including, without limitation, the U.S.
Export Administration Regulations. Government Rights The programs and related materials are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the U.S.
Government is subject to restrictions set forth in the Federal Acquisition Regulations and its Supplements. Hardware Technical Help 1. Please have the number of the current version of your firmware ready when you call. The version of the firmware in Emerson Process Management s Model 2100 series, Model 2400, and other analyzers appears on the power-up screen that is displayed when the analyzer is turned on. If you have a problem, explain the exact nature of your problem. For example, what are the error messages?
When to they occur? Know what you were doing when the problem occurred. For example, what mode were you in?
What steps did you go through? Try to determine before you call whether the problem is repeatable. Hardware Repair Emerson repairs and updates its hardware products free for one year from the date of purchase. This service warranty includes hardware improvement, modification, correction, recalibration, update, and maintenance for normal wear. This service warranty excludes repair of damage from misuse, abuse, neglect, carelessness, or modification performed by anyone other than Emerson Process Management. After the one year service warranty expires, each return of a Emerson Process Management hardware product is subject to a minimum service fee. If the cost of repair exceeds this minimum fee, we will call you with an estimate before performing any work.
Contact Emerson Process Management s Product Support Department for information concerning the current rates. Returning Items 1. Call Product Support (see page 2) to obtain a return authorization number. Please write it clearly and prominently on the outside of the shipping container. If returning for credit, return all accessories originally shipped with the item(s).
Include cables, software diskettes, manuals, etc. Enclose a note that describes the reason(s) you are returning the item(s). Insure your package for return shipment. Shipping costs and any losses during shipment are your responsibility. COD packages cannot be accepted and will be returned unopened. Obsolete Hardware Although Emerson Process Management will honor all contractual agreements and will make every effort to ensure that its software packages are backward compatible, to take advantage of advances in newer hardware platforms and to keep our programs reasonably small, Emerson reserves the right to discontinue support for old or out-of-date hardware items. 4 5 Software Technical Help Software Technical Support Emerson Process Management provides technical support through the following for those under maintenance contracts: Telephone assistantance and communication via the Internet.
Mass updates that are released during that time. Interim updates upon request. Please contact Emerson Process Management Customer Services for more information.
Emerson Csi 2140 Usb Driver
CE Notice Emerson Process Management products bearing the symbol on the product or in the user s manual are in compliance with applicable EMC and Safety Directives of the European Union. In accordance with CENELEC standard EN, normal intended operation is specified as follows: 1. The product must not pose a safety hazard. The product must not sustain damage as a result of use under environmental conditions specified in the user documentation.
Emerson Csi 2130 Usb Driver
The product must stay in or default to an operating mode that is restorable by the user. The product must not lose program memory, userconfigured memory (e.g., routes), or previously stored data memory. When apparent, the user may need to initiate a reset and/or restart of a data acquisition in progress. A Declaration of Conformity certificate for the product is on file at the appropriate Emerson Process Management office within the European Community.